بررسی تاثیر جنس سایهانداز بر میزان نور ورودی و شرایط حرارت داخلی (مطالعه موردی: شهرستان دزفول) | ||
| پژوهشهای دانش زمین | ||
| دوره 12، شماره 4 - شماره پیاپی 48، 1400، صفحه 19-31 اصل مقاله (1.04 M) | ||
| نوع مقاله: مقاله پژوهشی | ||
| شناسه دیجیتال (DOI): 10.48308/esrj.2022.101418 | ||
| نویسندگان | ||
| مریم قیصری؛ محسن تابان* | ||
| گروه معماری، دانشکده معماری و شهرسازی، دانشگاه صنعتی جندی شاپور دزفول، دزفول، ایران | ||
| چکیده | ||
| بهرهوری انرژی با هدف کاهش مصرف انرژی یکی از مهمترین چالشها در حوزه انرژیست که اغلب کشورهای جهان با آن مواجه هستند. در همین راستا ارزیابی جنبههای معماری از جمله مسئله کنترل نور و حرارت ناشی از آن در ساختمانها، یکی از اقداماتی است که میتوان در این زمینه انجام داد. هدف اصلی این پژوهش، دستیابی به تعادلی مطلوب بین آسایش حرارتی و توزیع نور در فضا میباشد. یکی از شرایط اصلی تامین آسایش حرارتی در اقلیمهای گرم فراهم نمودن سایههای مناسب است. بنابراین در شهرستان دزفول با توجه به قرارگیری آن در اقلیم گرم و نیمهمرطوب و به دلیل بالا بودن دمای هوا در اکثر ماههای سال، نیاز به سایه و عناصر سایهانداز امری اجتناب ناپذیر میباشد. در این پژوهش در جهت طراحی بهینه جداره نورگذر، ابتدا فرم بهینه سایهانداز برای جبهههای جنوبی، شمالی، شرقی و غربی به کمک نرمافزار اکوتکت طراحی و سپس با استفاده از نرمافزار دیزاین بیلدر به بررسی تاثیر جنس سایهانداز بر میزان نور و گرمای عبوری از جداره نورگذر پرداخته شده است. براساس یافتههای تحقیق، به کارگیری سایه اندازهایی از جنس چوب و شیشه میتوانند تعادل مطلوبتری را بین بهرهگیری از نور طبیعی و کنترل حرارت ناشی از آن برقرار نمایند و در نهایت شیشه به دلیل افزایش گستره دید و مقاومت در برابر رطوبت میتواند گزینه مناسبتری نسبت به چوب باشد. | ||
| کلیدواژهها | ||
| آسایش حرارتی؛ سایهانداز؛ شهرستان دزفول؛ نور طبیعی | ||
| عنوان مقاله [English] | ||
| Investigating the effect of shading material on the amount of incoming light and indoor heating conditions (Case study: dezful city) | ||
| نویسندگان [English] | ||
| Maryam Gheisari؛ Mohsen Taban | ||
| Department of Architecture, Faculty of Architecture and Urban Planning, Jondishapur University of Technology, Dezful, Iran | ||
| چکیده [English] | ||
| Introduction Theuseofsunlightasarenewablesourcehasalwaysbeenconsideredimportantbydesigners.Ithasalwaysbeenconsideredasoneofthemainfactorsinthedesignandformationofarchitecturalspaces.Optimaluseofnaturallightin order to achieve highlightefficiencyrequiresacorrectunderstandingofthecharacteristicsandfactorsaffectingit.Therefore, sunlightisdividedintothreeregionsintermsofspectralregions:ultraviolet(ultraviolet),visible,andinfrared(infrared).Thevisiblepartofthespectrum,whileilluminatingtheplace,alsohelpstoheatit,whiletheinvisibleinfraredrayshaveonlythermaleffects.Sowindowtransmittancesurfacesplayanimportantroleinenergyconsumptionofthebuilding.Theflowofheatthroughthepermeablesurfacesincreasestheheatandthusthecoolingload.Therefore,bycontrollingtheheatfromthesunontheexternalopenings,thecoolingloadofthebuildingcanbesignificantlyreduced.Oneofthemeasuresconsideredinthisfieldistheuseofshadowsontheexternalwindows. Materials and methods In this research, in the first step, the range of requirements for shade and sun in Dezful city is determined according to the climate needs calendar of this city. Using Ecotect 2011 software, optimal shading is designed for glazing in the south, north, east and west. In the next step, using Design Builder software version 6 with Energy Plus engine 8.9, the effect of shading material (acrylic, wood, glass, aluminum, and steel) on the amount of solar gain, daylight factor, and daylight autonomy indoors on the fronts is investigated. South and east are given as examples. Discussion and results According to the research findings, the amount of solar gain, daylight factor and autonomy of daylight in the interior space have the lowest quantity in acrylic shading while glass and wood have the higher values and aluminum and steel are maximum. Shades of wood and glass with similar values can create a better balance between light and heat than other indoor shades. Finally, between the two options of glass and wood, glass can be a more suitable option for designing shades on different fronts due to its elegance, beauty, moisture resistance and increasing field of view. Conclusion Theformandtypeofshadingdevicesareamongtheparametersaffectingtheamountofincominglightandcontrolofindoorheatingconditions.Bychoosingtheappropriateshadingdevice,thermallycomfortableconditionscanbeprovidedforindoorspaces.Themainpurposeofthisstudyistoachievethedesiredbalancebetweenthermalcomfortandlightdistributioninspace.Oneofthemainconditionsforprovidingthermalcomfortinwarmclimatesistoprovidesuitableshades.Therefore,inDezfulcity,duetoitslocationinhotand semi-humid climatesandduetohightemperaturesinmostmonthsoftheyear,theneedforshadeandshadingelementsisinevitable. | ||
| کلیدواژهها [English] | ||
| Thermal comfort, Shading device, Dezful city, Natural light | ||
| مراجع | ||
|
-طاهباز، م.، 1385. طراحی سایه در فضای باز، نشریه هنرهای زیبا، شماره 31، ص 65-96.
-میری، م.، و کمپانی سعید، م.، 1393. طراحی فرایندی جهت نیل به روشنایی طبیعی مناسب برای یک فضای کاری اداری در شهر تهران از طریق محاسبه ابعاد بهینه پنجره، سایبان و عمق مفید اتاق، نشریه معماری و شهرسازی آرمانشهر، ص 73-89.
-Al Touma, A. and Ouahrani, D., 2017. Shading and day-lighting controls energy savings in offices with fully-Glazed façades in hot climates. Energy and Buildings, v. 151, p. 263-274.
-Choi, S.J., Lee, D.S. and Jo, J.H., 2017. Lighting and cooling energy assessment of multi-purpose control strategies for external movable shading devices by using shaded fraction. Energy and Buildings, v. 150, p. 328-338.
-Evola, G., Gullo, F. and Marletta, L., 2017. The role of shading devices to improve thermal and visual comfort in existing glazed buildings. Energy Procedia, v. 134, p. 346-355.
-Freewan, A.A., 2014. Impact of external shading devices on thermal and daylighting performance of offices in hot climate regions. Solar Energy, v. 102, p. 14-30.
-Infrared Waves: Definition, Uses & Examples, 2015. Retrieved from https://study.com/academy/lesson/infrared-waves-definition-uses-examples.html
-Liu, S., Kwok, Y.T., Lau, K.K.L., Chan, P.W. and Ng, E., 2019. Investigating the energy saving potential of applying shading panels on opaque facades: A case study for residential buildings in Hong Kong. Energy and Buildings, v. 193, p. 78-91.
-Kirimtat, A., Koyunbaba, B.K., Chatzikonstantinou, I. and Sariyildiz, S., 2016. Review of simulation modeling for shading devices in buildings. Renewable and Sustainable Energy Reviews, v. 53, p. 23-49.
-Minnaert, M., 2013. The nature of light and colour in the open air. Courier Corporation. http://www.theodoropoulos.info/attachments/076_kodak03_Nature-of-Light.pdf
| ||
|
آمار تعداد مشاهده مقاله: 14,926 تعداد دریافت فایل اصل مقاله: 10,571 |
||
