National Productivity Award Model to Accelerating Sustainable Practices in the Mining Industry | ||
| Sustainable Earth Trends | ||
| دوره 5، شماره 1، 2025، صفحه 47-59 اصل مقاله (265.23 K) | ||
| نوع مقاله: Original Research Article | ||
| شناسه دیجیتال (DOI): 10.48308/set.2024.237069.1071 | ||
| نویسندگان | ||
| Behzad Mohammadian1؛ Mahsa Pishdar* 1؛ Hassan Zarei Matin1؛ Adel Pourghader Chobar2 | ||
| 1Department of Management, Management and Accounting Faculty, College of Farabi, University of Tehran, Qom, Iran | ||
| 2Faculty of Industrial and Mechanical Engineering, Qazvin Branch, Islamic Azad University, Qazvin, Iran | ||
| چکیده | ||
| The mining industry significantly impacts national economies. However, there is a lack of industry-specific productivity frameworks that support sustainable development in this sector. This study aims to fill that gap by creating a national productivity award model tailored to Iran's mining industry. Using a methodological synthesis, the research begins with an analysis of key success factors and a comparison of national and international productivity evaluation systems. The resulting framework comprises three main components of productivity drivers with a maximum obtainable score of 200 points, focusing on leadership, culture, strategy, and governance. Productivity enablers with a maximum score of 350 points as the second component focus on critical resources and capabilities such as staff management to facilitate productivity. The last component is the consequences of productivity with a maximum obtainable score of 450 points, paying attention to the assessment of both perceptual and operational achievements. These 3 main components are built on ten core values, such as intelligent production, systems thinking, sustainable development, and leadership. This model not only fosters continuous improvement but also addresses challenges with minimal resistance, enabling sustainable transformation in the mining sector. Measuring drivers like workforce efficiency, skill level, and technology use can reveal specific gaps where productivity is hindered. Strengthening workforce competencies through continuous training and safety protocols. The consequences of productivity, boosting long-term profitability, and environmental compliance could be mentioned. Adopting sustainable mining practices not only aligns with regulatory compliance but can reduce waste and enhance corporate reputation. | ||
| کلیدواژهها | ||
| Award Design؛ Excellence Model؛ Productivity؛ Sustainability؛ Value Chain | ||
| مراجع | ||
|
Aguilar-Pesantes, A., Pena Carpio, E., Vitvar, T., Koepke, R. & Menendez-Aguado, J.M., 2021. A Comparative Study of Mining Control in Latin America. Mining, 1(1), 6-18. Alves, W., Ferreira, P. & Araujo, M., 2021. Challenges and pathways for Brazilian mining sustainability. Resources Policy, 74, 101648. Amoako, K.O., Amoako, I.O., Tuffour, J., Naab, G.Z. & Owiredu-Ghorman, K., 2023. Challenges of Sustainability Practices: Evidence From a Gold Mining Multinational Enterprise in Ghana", Harrison, C. and Omeihe, K.O. (Ed.) Contextualising African Studies: Challenges and the Way Forward (New Frontiers in African Business and Society), Emerald Publishing Limited, Leeds, 53-78. Amos, G.J., 2024. Corporate social and environmental reporting in the mining sector: seeking pragmatic and moral forms of legitimacy? Journal of Accounting in Emerging Economies, 14(3), 548-584. Asiedu, M., Anokye Effah, N.A. & Arthur B., 2023. Innovation and Firm Productivity in Central America. Journal of the Knowledge Economy, https://doi.org/10.1007/s13132-023-01321-w. Asif, M., Searcy, C., Zutshi, A. & Fisscher, O. A. M., 2013. An integrated management systems approach to corporate social responsibility. Journal of Cleaner Production, 56, 7-17. Ayswer, A.S., Ramasamy, N., Anand, M.D. & Santhi, N., 2023. Analysis of performance indicators in mining industry using Interpretive structural modelling approach. Catalyst Research, 23(2), 3547-3564. Barney, J., 1991. Firm Resources and Sustained Competitive Advantage. Journal of Management, 17(1), 99-120. Blazey, M.L. & Grizzell, P.L., 2019. Insights to Performance Excellence, 2019-2020: Using the Baldrige Framework and Other Integrated Management Systems. ASQ Quality Press. Bodziony, P., Kasztelewicz, Z. & Sawicki, P., 2016. The Problem of Multiple Criteria Selection of the Surface Mining Haul Trucks. Archives of Mining Sciences, 61. Boiral, O. & Heras-Saizarbitoria, I., 2013. Heras-Saizarbitoria, I. & O. Boiral (2012), « Is ISO 9001 really effective for the global supply chain management? A Preliminary exploratory analysis on customer-suppliers’ relationships in China », dans Mercès Bernardo (ed.), Quality management and beyond: the current situation and future perspectives, Catalunya: Documenta Universitaria, 29-41. Bueno, A., Filho, M.G. & Frank, A.G., 2020. Smart production planning and control in the industry 4.0 context: A systematic literature review. Computers & Industrial Engineering, 149, 106774. Carlos Sá, J., Oliveira, A.R., Carvalho, J.D., Santos, G. & Silva, F., 2023. A New Conceptual Model for Excellence in Business towards Sustainable Development. Journal of Quality Innovation Prosperity, 27(2). Carvalho, A.M., Sampaio, P., Rebentisch, E., Carvalho, J. A. & Saraiva, P., 2021. The influence of operational excellence on the culture and agility of organizations: evidence from industry. International Journal of Quality & Reliability Management, 38(7), 1520-1549. Castilla-Gomez, J. & Herrera-Herbert, J., 2015. Environmental analysis of mining operations: Dynamic tools for impact assessment. Minerals Engineering, 76, 87-96. Costa, F., Lispi, L., Staudacher, A.P., Rossini, M., Kundu, K. & Cifone, F.D., 2019. How to foster Sustainable Continuous Improvement: A cause-effect relations map of Lean soft practices. Operations Research Perspectives, 6, 100091. Dahlgaard, J.J., Chen, C.-K., Jang, J.-Y., Banegas, L.A. & Dahlgaard-Park, S.M., 2013. Business excellence models: limitations, reflections and further development. Total Quality Management & Business Excellence, 24(5-6), 519-538. De Haas, R., & Poelhekke, S., 2019. Mining matters: Natural resource extraction and firm-level constraints. Journal of International Economics, 117, 109-124. Deveci, M., Varouchakis, E.A., Brito-Parada, P.R., Mishra, A.R., Rani, P., Bolgkoranou, M. & Galetakis, M., 2023. Evaluation of risks impeding sustainable mining using Fermatean fuzzy score function based SWARA method. Applied Soft Computing, 139, 110220. DiMaggio, P.J. & Powell, W.W., 2000. The iron cage revisited institutional isomorphism and collective rationality in organizational fields. In J. A. C. Baum & F. Dobbin (Eds.), Economics Meets Sociology in Strategic Management (Vol. 17, pp. 143-166). Emerald Group Publishing Limited. Dou, S., Xu, D. & Keenan, R., 2023. Critical mineral sustainable supply: Challenges and governance. Futures, 146, 103101. El Bazi, N., Mabrouki, M., Laayati, O. Laayati, N., El Hadraoui, H., El Hadraoui, E.F., & Chebak, A., 2023. Generic Multi-Layered Digital-Twin-Framework-Enabled Asset Lifecycle Management for the Sustainable Mining Industry. Sustainability, 15(4). Fonseca, L., Amaral, A. & Oliveira, J., 2021. Quality 4.0: The EFQM 2020 Model and Industry 4.0 Relationships and Implications. Sustainability, 13(6), 3107. Freeman, R.E., 1984. Strategic Management: A Stakeholder Approach. Pitman. https://books.google.com/books?id=4PUJAQAAMAAJ . Gackowiec, P., Podobinska-Staniec, M., Brzychczy, E., Kühlbach, C. & Ozver, T., 2020. Review of Key Performance Indicators for Process Monitoring in the Mining Industry. Energies, 13(19), 5169. Garcia Martinez, M., Zouaghi, F., Garcia Marco, T. & Robinson, C., 2019. What drives business failure? Exploring the role of internal and external knowledge capabilities during the global financial crisis. Journal of Business Research, 98, 441-449. Goecks, L., Santos, A. & Korzenowski, A., 2020. Decision-making trends in quality management: a literature review about Industry 4.0. Production, 30. Groeneveld, B. & Topal, E., 2011. Flexible open-pit mine design under uncertainty. Journal of Mining Science, 47(2), 212-226. Groeneveld, B., Topal, E. & Leenders, B., 2019. Examining system configuration in an open pit mine design. Resources Policy, 63, 101438. Hasanuzzaman, Chakraborty, K. & Bag, S., 2024. Forging a sustainable path: improving India’s (Bharat’s) coal mining operations for a better tomorrow. Benchmarking: An International Journal, Vol. ahead-of-print No. ahead-of-print. https://doi.org/10.1108/BIJ-08-2023-0572. Hosseinzadeh, A., Smyth, R., Valadkhani, A. & Moradi, A., 2018. What determines the efficiency of Australian mining companies? Australian Journal of Agricultural and Resource Economics, 62, 121-138. Humphreys, D., 2020. Mining productivity and the fourth industrial revolution. Mineral Economics, 33. https://doi.org/10.1007/s13563-019-00172-9. Jakkula, B., M, G.R. & Ch.S.N, M., 2020. Maintenance management of load haul dumper using reliability analysis. Journal of Quality in Maintenance Engineering, 26(2), 290-310. Maheswari, C., Priyanka, E.B., Thangavel, S., Vignesh, S.V.R. & Poongodi, C., 2020. Multiple regression analysis for the prediction of extraction efficiency in mining industry with industrial IoT. Production Engineering, 14(4), 457-471. Jibir, A., Abdu, M. & Buba, A., 2023. Does Human Capital Influence Labor Productivity? Evidence from Nigerian Manufacturing and Service Firms. Journal of the Knowledge Economy, 14, 805–830. Makinde, O.A., Mpofu, K. & Popoola, A.P.I., 2014. Review of the Status of Reconfigurable Manufacturing Systems (RMS) Application in South Africa Mining Machinery Industries. Procedia CIRP, 17, 136-141. Marinagi, C., Reklitis, P., Trivellas, P. & Sakas, D., 2023. The Impact of Industry 4.0 Technologies on Key Performance Indicators for a Resilient Supply Chain 4.0. Sustainability, 15(6), 5185. Mehrani, K., Mirshahvalad, A. & Abbasi, E., 2019. Portfolio optimization using black hole meta heuristic algorithm. specialty journal of accounting and economics, 5(2-2019), 1-13. Mehrani, K., Mirshahvalad, A. & Abbasi, E., 2019. Comparison of the Accuracy of Black Hole Algorithms and Gravitational Research and the Hybrid Method in Portfolio Optimization. International Journal of Finance & Managerial Accounting, 4(14), 111-126. Menezes, L.M.D., Escrig-Tena, A.B. & Bou-Llusar, J.C., 2022. Sustainability and Quality Management: has EFQM fostered a Sustainability Orientation that delivers to stakeholders? International Journal of Operations & Production Management, 42(13), 155-184. Mishra, P.C., Panigrahi, R.R. & Shrivastava, A.K., 2023. Geo-environmental factors’ influence on mining operation: an indirect effect of managerial factors. Environment, Development and Sustainability. https://doi.org/10.1007/s10668-023-03211-2 . Mohamed, H.A.E. & Eltohamy, A.I., 2022. Critical Success Factors for Competitiveness of Egyptian Construction Companies. Sustainability, 14(17), 10460. Mohanty, M.K., Mishra, P.C. & Samantaray, A., 2021. The Relationship of Critical Success Factors of the Mineral Industry: A Study on India. Vision, 27(1), 119-134. Onifade, M., Adebisi, J.A., Shivute, A.P. & Genc, B., 2023. Challenges and applications of digital technology in the mineral industry. Resources Policy, 85, 103978. Ozdemir, B. & Kumral, M., 2019. A system-wide approach to minimize the operational cost of bench production in open-cast mining operations. International Journal of Coal Science & Technology, 6(1), 84-94. Pilat, D. & Criscuolo, C., 2018. The future of productivity. Policy Quarterly, 14. https://doi.org/10.26686/pq.v14i3.5081. Pouresmaieli, M., Ataei, M. & Qarahasanlou, A.N., 2023. (a). A scientometrics view on sustainable development in surface mining: Everything from the beginning. Resources Policy, 82, 103410. Pouresmaieli, M., Ataei, M., Qarahasanlou, A.N., & Barabadi, A., 2023. (b). Integration of renewable energy and sustainable development with strategic planning in the mining industry. Results in Engineering, 20, 101412. Rezaei, J., 2016. Best-worst multi-criteria decision-making method: Some properties and a linear model. Omega, 64, 126-130. Samadhiya, A., Agrawal, R. & Garza-Reyes, J.A., 2024. integrating industry 4.0 and total productive maintenance for global sustainability. The TQM Journal, 36(1), 24-50. Shakoor Shahabi, R., Basiri, M.H. & Kahag, M.R., 2018. Ranking of productivity improvement strategies in Iran mineral sector based on integrated SWOT-FAHP-FTOPSIS analysis. Arabian Journal of Geosciences, 11(3), 65. Shimaponda-Nawa, M., Nwaila, G.T., Zhang, S.E. & Bourdeau, J. E., 2023. A framework for measuring the maturity of real-time information management systems (RTIMS) in the mining industry. The Extractive Industries and Society, 16, 101368. Sousa, R., Camanho, A.S., Conceicao Silva, M., da Silveira, G.J.C. & Arabi , B., 2023. Best practices, performance advantage and trade-offs: new insights from frontier analysis. Journal of Productivity Analysis, https://doi.org/10.1007/s11123-023-00714-y. Sun, S. & Anwar, S., 2019. R&D activities and FDI in China’s iron ore mining industry. Economic Analysis and Policy, 62, 47-56. Tan, J. & Wei, J., 2023. Configurational Analysis of ESG Performance, Innovation Intensity, and Financial Leverage: a Study on Total Factor Productivity in Chinese Pharmaceutical Manufacturing Firms. Journal of the Knowledge Economy. https://doi.org/10.1007/s13132-023-01678-y Tang, Z. & Qin, D., 2024. Sustainable mining and the role of environmental regulations and incentive policies in BRICS. Resources Policy, 90, 104718. Udeagha, M.C. & Muchapondwa, E., 2023. Striving for the United Nations (UN) sustainable development goals (SDGs) in BRICS economies: The role of green finance, fintech, and natural resource rent. Sustainable Development, 31(5), 3657-3672. Volk, H.J., 2016. Wirtgen Drives the Development of Surface Mining. Procedia Engineering, 138, 30-39. Yousefian, M., Bascompta, M., Sanmiquel, L. & Vintro, C., 2023. Corporate social responsibility and economic growth in the mining industry. The Extractive Industries and Society, 13, 101226. Zapletalova, S., 2022. The business excellence models and business strategy. Total Quality Management & Business Excellence, 34 (1-2), 131-147. Zelenyuk, V., 2023. Productivity analysis: roots, foundations, trends and perspectives. Journal of Productivity Analysis, 60, 229–247. Zhang, K., Kang, L., Chen, X., He, M., Zhu, C. & Li, D., 2022. A Review of Intelligent Unmanned Mining Current Situation and Development Trend. Energies, 15(2), 513. Zhironkina, O. & Zhironkin, S., 2023. Technological and Intellectual Transition to Mining 4.0: A Review. Energies, 16(3), 1427. | ||
|
آمار تعداد مشاهده مقاله: 113,866 تعداد دریافت فایل اصل مقاله: 191 |
||