ارزیابی تنوعژنتیکی و شناسایی صفات موثر بر عملکرد لاینهای نخود با استفاده از روشهای آماری چندمتغیره | ||
| فصلنامه علوم محیطی | ||
| مقاله 2، دوره 15، شماره 2، تیر 1396، صفحه 21-38 اصل مقاله (1.11 M) | ||
| نوع مقاله: مقاله پژوهشی | ||
| نویسندگان | ||
| مهدی کاکائی1؛ سید سعید موسوی* 2 | ||
| 1بخش مهندسی کشاورزی، دانشگاه پیام نور، تهران- ایران | ||
| 2گروه زراعت و اصلاح نباتات، دانشکده کشاورزی، دانشگاه بوعلی سینا، همدان | ||
| چکیده | ||
| سابقه و هدف: نخود محتوای پروتئینی بالا و نقش بسیار مهمی در سیکل امنیت غذایی در جهان و بهویژه در توسعه کشورهایی نظیر ایران دارد. ایران یکی از مهمترین کشورهای آسیایی در تولید نخود است. نخود ایرانی در 33 کشور کشت میشود و سطح زیر کشت آن در ایران 650000 هکتار است. اما یکی از مشکلات بسیار اساسی، عملکرد پایین دانه نخود در ایران است. بنابراین اصلاح گیاهان روش مناسبی برای حل این مشکل است. تنوعژنتیکی، وراثتپذیری و شدت گزینش سه عامل مؤثر در پاسخ به گزینش برای یک صفت است. استفاده از روشهای آماری چندمتغیره روش مناسبی برای شناسایی تنوعژنتیکی در برنامههای اصلاحی است. بنابراین تجزیه به مولفههای اصلی، تجزیه عاملی، تجزیه کلاستر و تجزیه تابع تشخیص از جمله مهمترین روشهای آماری چندمتغیره هستند که بهصورت عمومی برای تعیین تنوع در گیاهان استفاده میشود. خیلی از محققان از روشهای آماری چندمتغیره در گیاهانی نظیر برنج، سیبزمینی، گندم و نخود استفاده کردند و اثر ژنوتیپ و صفات در نخود در ارتباط با تنوع ژنوتیپی مهمترین موضوعات در تحقیقات اخیر بوده است. مواد و روشها: مهمترین اهداف این پژوهش، ارزیابی تنوعژنتیکی در 19 لاین نخود و شناسایی صفات مؤثر بر عملکرد دانه با استفاده از روشهای آماری چندمتغیره مختلف بود. بنابراین، تحقیق حاضر در قالب یک طرح بلوکهای کامل تصادفی با سه تکرار در شرایط مطلوب رطوبتی اجرا شد. آزمایش در مزرعه تحقیقاتی دانشگاه بوعلیسینا (و آزمایشگاه دانشگاه پیامنور اسدآباد) در فصل رشد انجام شد. صفات شاخص کلروفیل، ارتفاع گیاه، تعداد شاخه در هر بوته، تعداد غلاف در بوته، تعداد دانه در بوته، تعداد دانه در غلاف، وزن صد دانه، عملکرد دانه، عملکرد بیولوژیک و شاخص برداشت اندازهگیری شد. پس از اندازهگیری صفات، روشهای آماری تجزیه به مؤلفههای اصلی، تجزیه عاملی، تجزیه کلاستر و تجزیه تابع تشخیص برای دادههای بهدستآمده انجام شد. نتایج و بحث: نتایج تجزیه به مؤلفههای اصلی نشان داد که سه مؤلفه اول در مجموع 9/68 درصد از واریانس کل دادهها را توجیه کردند. مؤلفه اول و دوم بهترتیب بهعنوان مؤلفههای "عملکرد دانه" و " شاخص برداشت" نامگذاری شدند که مقدار زیاد آنها مورد نظر بود. نتایج تجزیه به عاملها، بهترتیب سه عامل "عملکرد دانه"،"شاخص برداشت" و "بنیه گیاه" را شناسایی کرد که این سه عامل هم در مجموع 8/68 درصد از واریانس کل را توجیه کردند. تجزیه خوشهای بیانگر تنوع قابلتوجه در بین لاینها بود بهطوریکه لاینها را در چهار خوشه مجزا گروهبندی کرد. نتایج تجزیه تابع تشخیص نیز، صحت گروهبندی تجزیه خوشهای را بهطور صد در صد تأیید کرد. بهطور کلی، لاینها دارای تنوعژنتیکی بالا و قابلتوجهی بودند و با توجه به نتایج حاصله، لاینهای شماره 12 و 18 بهترتیب به عنوان مطلوبترین و نامطلوبترین لاینها تحت شرایط این آزمایش شناسایی شدند. نتایج نشان داد در حالیکه افزایش صفات تعداد غلاف در بوته، وزن صد دانه و شاخص برداشت، بیشترین تأثیر را بر افزایش عملکرد دانه داشتند، ولی افزایش صفت تعداد شاخه (مجموع تعداد شاخههای اصلی و فرعی) در بوته منجر به کاهش عملکرد دانه در این تحقیق شد. نتیجهگیری: بر اساس نتایج بهدستآمده از این تحقیق، روشهای آماری چندمتغیره، روشهای مناسب و مفیدی برای انتخاب عملکرد دانه هستند که میتواند به طور موفقیتآمیزی ژنوتیپها و صفات را از هم تفکیک کند. هدف اصلی این تحقیق بررسی تنوع ژنتیکی 19 ژنوتیپ نخود برای برنامههای اصلاحی است. بر اساس نتایج کلی، صفات تعداد غلاف در بوته مناسبترین صفت برای انتخاب غیرمستقیم عملکرد دانه است و ژنوتیپ شماره 12 مناسبترین ژنوتیپ از نظر داشتن بیشترین مقدار صفت تعداد غلاف در بوته، وزن صد دانه و شاخص برداشت است، در حالی که ژنوتیپ شماره 18 یک ژنوتیپ نامناسب است، هرچند دارای بیشترین مقدار صفت تعداد شاخه در گیاه نیز است. | ||
| کلیدواژهها | ||
| نخود زراعی؛ تجزیه به مؤلفه های اصلی؛ تجزیه عاملی؛ تجزیه خوشه ای؛ تجزیه تابع تشخیص | ||
| عنوان مقاله [English] | ||
| Assessing genetic diversity and selection of effective traits on yield of Chickpea lines using multivariate statistical methods | ||
| نویسندگان [English] | ||
| Mehdi Kakaei1؛ Sayyed Saeed Moosavi2 | ||
| 1Agriculture Department, Payame Noor University,Tehran, Iran, | ||
| 2Agronomy and Plant Breeding Department, Faculty of Agriculture, Bu-Ali Sina University, Hamedan, Iran | ||
| چکیده [English] | ||
| Introduction: Chickpea contains a high level of protein and plays very important role in the food security cycle in the worldwide, especially in the developing countries such as Iran which is one of the most important Asian countries in terms of chickpea production. Indeed, Iranian chickpea is planted in 33 countries and its area of cultivation in Iran is approximately 650000 hectare (Ahmed Khan, 2009). Low grain yield is the most basic problem of chickpea in Iran and plant breeding is a economic and permanent solution for solving this problem. Genetic diversity, heritability and intensive selection are three effective factors for responding to selection of traits. As a consequence, multivariate statistical methods are conventional and suitable for identifying genetic diversity in plant breeding programmes; principal component analysis, factor analysis, cluster analysis and discriminate function are the most important multivariate methods generally used for different plants. Many researchers have used multivariate statistical methods in rice (Gholipour and Mohammad-Salehi, 2003), potato (Rabie et al., 2008), wheat (Zaki Zadeh et al., 2010), chickpea (Jeena and Arora, 2002), and Identifying the most effective genotypes and traits in chickpea and assessing the genotype diversity were the main objectives of the current research. Material and methods: In order to assess genetic diversity and identify the most important and effective traits of grain yield in 19 chickpea genotypes, the current experiment was conducted based on a randomized complete block design with three replications under well water conditions. The experiment was carried out in the Bu-Ali Sina University research field growing season and laboratory of Payame Noor University. The traits of chlorophyll index, plant height, branch number per plant, pod number per plant, seed number per plant, seed number per pod, 100-kernel weight, economic yield per unit area, biological yield per unit area and harvest index were measured. After trait measurement, principal component analysis (PCA), factor analysis (FA), cluster analysis (CA) and discriminate function analysis (DFA) were carried out in order to reach the aims of the research. Results and discussion: The results showed that the maximum coefficient of variation belonged to the traits of pod number per plant and harvest index, while the trait of 100-kernel weight had the minimum coefficient of variation. The results of principal component analysis showed that the three first components explained 68.9 percent of the total variance of the traits. The first and second components were known as the “grain yield” and “harvest index” components, respectively. In addition, factor analysis identified the three factors of “grain yield, “harvest index” and “plant vigour”. Cluster analysis based on the WARD method grouped the genotypes into four clusters. Meanwhile, discriminate function analysis confirmed the cluster analysis groups. The results showed a high genetic diversity among the lines. Lines number 12 and 18 were recognized as generally the best and the worst genotypes. In addition, the traits of pod number per plant, 100-kernel weight and harvest index had maximum effect on grain yield, while the trait of branch number per plant had a negative effect on grain yield in the current research. Conclusion: According to the results obtained in the research, multivariate statistical methods are suitable and efficient methods for data reduction and indirect selection of grain yield that could successfully separate the efficient genotypes and the traits. The main objective was to assess the genetic diversity of 19 chickpea lines for their application in the new plant breeding programmes. According to the total results, the traits of pod number per plant were recognized as the most suitable traits for indirect grain yield selection. Line number 12, as a suitable line, had a maximum amount of the traits of pod number per plant, 100-kernel weight and harvest, while line number 18 (an unsuitable line) included the maximum amount of the trait of branch number per plant. | ||
| کلیدواژهها [English] | ||
| Chickpea, Principle component analysis, Factor analysis, Cluster analysis, Discriminate function analysis | ||
| مراجع | ||
| ||
|
آمار تعداد مشاهده مقاله: 10,115 تعداد دریافت فایل اصل مقاله: 4,669 |
||
